Vaisala AWS310-SITE, Configuration And Maintenance Manual

Page: 146 / 176

Command Syntax Description
spset
[
parameter
] [
value
]
spset
shows a list of static parameters.
spset parameter value sets the given value to the given static
parameter.
This command is not usually needed.
spval [ parameter ] [ value ] Shows information on the given parameter type:
•
I
= Integer
•
R
= Real
•
S
= String
• B = Byte array
• Number field with the parameter status value in hexadecimal
Can also be used to set the static parameter value (see spset ).
sysinfo [ sensors | ports ] sysinfo shows a summary of system information.
sysinfo sensors shows system information on system sensors.
sysinfo ports shows the system information output and information
on communication module ports.
time [ HH MM SS YY MM DD ] time shows the current time.
time HH MM SS changes the current time. For example: time 14 10 00
time HH MM SS YY MM DD
changes the current date. For example:
time 14 10 00 98 12 31
timezone [ hours ] timezone shows the time zone.
timezone hours
defines the time difference from UTC and sets a new
time zone. For example: timezone 2
userlevel [ level < set |
clear
>]
Protects the system from unauthorized use. The command provides
3 password protected access levels to shell commands, as well as to the
visibility of system data. By default, the user levels are not in use.
verify < source_file >
[ destination_file ]
Compares two files. If they are different, the response is:
Error: Files are different
warnings [ clear ] warnings shows the active warnings. Warnings indicate that there are
some problems in the software.
warnings clear clears the active warnings.
zr
[
rectimeout
<
time_in_ms
>]
Zmodem command for transferring the setup file to the QML data logger
(used instead of the AWS Client function).
zs < filename > Zmodem command for sending a file from the QML data logger (used
instead of the AWS Client function).
AWS310-SITE Configuration and Maintenance Manual M211828EN-C
144