Installation instructions geoTHERM VWS/VWW 0020051574_01
4
1.3
Applicability of the manual
These installation instructions apply exclusively to appli-
ances with the following part numbers:
Type name
Article number
Brine/Water Heat Pumps
VWS 220/2
0010002797
VWS 300/2
0010002798
VWS 380/2
0010002799
VWS 460/2
0010002800
Water/Water Heat Pumps
VWW 220/2
0010002801
VWW 300/2
0010002802
VWW 380/2
0010002803
VWW 460/2
0010002804
Table 1.1 Type designations and article numbers
The part number of the equipment can be taken from
the identification plate.
1.4 CE
label
With the CE mark, we confirm as equipment manufac-
turers that the appliances in the geoTHERM range satis-
fy the basic requirements of the following Directives:
- Electromagnetic Compatibility Directive (Council
Directive 89/336/EEC)
- Low voltage directive (73/23/EEC)
- EN 14511 (heat pumps with electrically-driven compres-
sors for heating, specifications for appliances for
space heating and for warming drinking water)
- EN 378 (safety and environmentally related specifica-
tions for refrigerating systems and heat pumps)
1.5 Intended
use
The Vaillant geoTHERM heat pumps are state-of-the-art
appliances which have been constructed in accordance
with recognised safety regulations. Nevertheless, there
is still a risk of death or serious injury to the user or
others or of damage to the device and other property in
the event of improper use or use for which it is not in-
tended.
This unit is not intended for use by persons (including
children) having limited physical, sensory or mental ca-
pacities or who have inadequate experience and/or
knowledge, unless supervised by a person responsible
for their safety or who has been given instructions from
them as to how to operate the unit.
Children must be supervised to ensure that they do not
play with the unit.
The units are intended as heat generators for closed
hot-water central heating installations, for cooling oper-
ation and for hot water generation. Any other use or ex-
tended use is considered to be improper. The manufac-
turer or supplier is not liable for any resulting damage.
The user alone bears the risk.
The appliances are intended for operation on a power
supply network with a system impedance Z
max
at the
transfer point (utility connection) of 0.1 ohms maximum.
Intended use includes the observance of the installation
manual.
a
Caution!
Any improper use is forbidden.
The appliances must be installed by a heating engineer,
who is responsible for adhering to the existing regula-
tions, rules and guidelines.
1 Notes on the documentation
