MAINTENANCE
83
8.4.1
Moving along the rail
Vacuum the conductor system and connecting caps, as well as the reversal points. Begin at the entry point of
the system to be cleaned and clean the conductor system along its entire length.
Conductor system sections
1. Vacuum the sections with the cleaning brush and
vacuum cleaner.
Connecting caps
1. Vacuum the connecting caps with the cleaning
brush and vacuum cleaner, knocking the back of
the connecting caps with the ball of the hand.
Knock the connecting caps at least twice, with
three knocks each.
If this is not possible due to design, then knock
the connecting caps from the front side.
NOTICE!
Clean especially the reversal points on the sections.
Summary of Contents for VKS10
Page 89: ...MAINTENANCE 87 Connecting caps mast assembly before Connecting caps mast assembly after ...
Page 96: ...PROTECTIVE MEASURES 94 10 PROTECTIVE MEASURES 10 1 EU conformity declaration ...
Page 99: ...CE Technical Documentation DQS certified in accordance DIN EN ISO 9001 2015 OHSAS 18001 2007 ...