manualshive.com logo in svg

Vahle VKS10, Translation Of The Original Instructions, Page: 77 / 99

Share
Download
Vahle VKS10 Translation Of The Original Instructions Download Page 77

 

MALFUNCTIONS

75

 

7

MALFUNCTIONS

7.1

Safety information about malfunctions

DANGER!

Electrical voltage on the system

Death or serious injury from electric shock.

►

Before beginning any work, ensure that the system is free of voltage and remains
so for the duration of the work. Observe the safety instructions!

WARNING!

Risk of injury in case of improper troubleshooting!

Improper troubleshooting may cause serious injuries or property damage.

►

Ensure sufficient installation space before beginning any work.

►

Switch off power supply, verify that the system is free of voltage, and secure
against switching back on.

7.2

Conduct in case of malfunction

General principle:

• If case of malfunctions that present an immediate hazard to persons or property, immediately activate the

safety devices.

• Determine the cause of the fault.
• Notify the person in charge at the place of operation.

NOTICE!

The inspection and maintenance tasks listed in the technical documentation must be
performed and documented regularly:

(location, spare part, task performed, date, name of inspector).

►

Only persons with the required training, qualification and authorization may per-
form troubleshooting work on the system.

Summary of Contents for VKS10




































































































Reviews:

No comments