manualshive.com logo in svg

Vahle VKS10, Translation Of The Original Instructions, Page: 54 / 99

Share
Download
Vahle VKS10 Translation Of The Original Instructions Download Page 54

 

COMMISSIONING

52

 

CAUTION!

During installation work, there is risk of suffering crush injuries to the limbs in the ar-
eas between the individual parts!

During installation work, there is risk of suffering crush injuries to the limbs in the ar-
eas between the individual parts.

►

Watch out for your limbs.

►

Wear personal protective equipment. (see chapter: 2 )

NOTICE!

The conductor rail material is susceptible to corrosion.

Corrosion can occur when working on the conductor rail with tools.

►

Only tools that have not previously been used for ferritic materials may be used.

►

Use own tools for the different materials (aluminum, copper, stainless steel).

►

Chip-forming work (grinding etc.) must not be performed in the vicinity of the con-
ductor rail system.

NOTICE!

The following points have to be strictly observed during assembly!

►

Appropriate handling of materials.

►

Clean and metallic bright surfaces on all contact points.

►

Smooth crossovers, free of burrs, of the conductor rail profiles at the ends in order
to avoid breakdowns and a high carbon brush wear.

►

Firm tightening of all screws using the screw lock provided and observing the stat-
ed tightening torques.

►

Exact alignment of the conductor rail to the guide system.

►

Damaged materials must not be installed.

►

Observe all applicable regulations governing installation of the plant.

Summary of Contents for VKS10




































































































Reviews:

No comments