Vahle VKS10, Translation Of The Original Instructions

Page: 23 / 99

LAYOUT AND FUNCTION 21
(1)
Conductor rails connected in parallel
4.3.4 Fixed hangers/sliding hangers
All sections must be fastened at least twice, with the maximum hanger spacing of 1.2 m being observed. The
hanger brackets designed as sliding hangers allow three different types of fastening:
1) Installation in VAHLE support profile (clip fastening system)
2) Installation in C rail (screw fastening)
3) Installation on support brackets (screw fastening)
NOTICE!
The conductor system can slide in the hangers in case of longitudinal expansion. It is secured in the hanger
by an additional screw at fixed points. Here, a maximum distance of 6 m between two fixed points must be
maintained.
VM-SV10-8/63-100 0.445 8 781 156
VM-SV10-8/120-140 0.445 8 781 158
VM-SV10-9/63-100 0.460 9 781 159
VM-SV10-9/120-140 0.460 9 781 161
VM-SV10-9/200
(1)
0.460 9 781 162
VM-SV10-9/240-280
(1)
0.460 9 781 163
VM-SV10-10/63-100 0.475 10 781 164
VM-SV10-10/120-140 0.475 10 781 166
VM-SV10-10/200
(1)
0.475 10 781 167
VM-SV10-10/240-280
(1)
0.475 10 781 168
Type Weight [kg] Number of poles ID no.