Vacon 50X, User Manual

Page: 28 / 132

27 vacon connections
Tel. +358 (0)201 2121 • Fax +358 (0)201 212205
4
4.3 Terminals Found on the Vacon 50X Power Board
4.3.1 Description of the Terminals
Table 7 describes the Vacon 50X power terminals.
Note that earth ground is on the terminal strip (see Figure 8 below). See page 31 for specific information
about dynamic braking.
Figure 8: Power Terminals Size 0
Terminal Description
L1/R (L)
L2/S
L3/T (N)
These terminals are the line connections for input power. (Single-phase 230 Vac, 0,75 to 4,0
kW models connect to any two of these terminals.) See Figure 8 on page 27.
T1/U
T2/V
T3/W
These terminals are for motor connections.
Table 7:Description of Vacon 50X Power Terminals
GND L1/R L2/S L3/T T1/U T2/V T3/W GND
AC line power
Single or
Three phase
AC
motor