2
Using for the first time
Before operating the newly installed appliance for the first time, the following steps
should be taken:
▸ Remove packaging and transport materials as well as any protective blue film from
out of the cooking space.
▸ Clean the cooking space and the accessories.
▸ Press the power button.
–
The appliance switches on.
Version 1 *
* Depending on the software version
–
Various user settings necessary for operation, such as language, time and temper-
ature unit, appear in the display one after the other.
▸ Make the settings and confirm.
▸ Fill the water tank with fresh, cold drinking water and slot into position in the water
tank compartment.
Language and time must be set so that the appliance can be operated.
Version 2 *
* Depending on the software version
▸ Set the time (see page 39).
▸ If necessary, adjust the user settings to the water hardness (see page 40).
▸ Fill the water tank with fresh, cold drinking water and slot into position in the water
tank compartment.
Completing the initial set-up
▸ Heat the empty cooking space (without wire shelves, baking trays, etc.) using the
operating mode at 180 °C for about 30 minutes.
As there is likely to be some smoke and odour given off, we recommend ventilat-
ing the room well during this phase.
All temperatures in these operating instructions are in degrees Celsius. Apply the
corresponding conversions via the user setting «Degrees Fahrenheit» (see page
41).
9
Summary of Contents for CSTXSLZ60Y
Page 1: ...Operating instructions Combi Steam XSL Combi steam cooker...
Page 57: ...57 17 Notes...
Page 58: ...58...
