GelDoc-It
TS3
and ChemiDoc-It
TS3
Imagers
37
81-0360-01 Rev B
chemi-capable systems.)
Select a higher
Capture Binning
to decrease image
capture time or to acquire more image signal in the
same amount of time, especially in low light
situations. Note that increased capture binning will
decrease the overall pixel resolution of the captured
image. (
Note
: Capture binning is set to 1x1, thus no
binning, by default.)
Depending upon system model, image
Interpolation
settings may also be found in the
Capture Binning
dropdown menu. By utilizing advanced algorithms
integrated into the software, Interpolation effectively
increases an image’s resolution beyond the camera’s
native resolution. To activate image interpolation,
select the desired interpolated resolution from the
Capture Binning
dropdown menu.
“Off”
and
“On”
Sliders
Throughout the TS3 interface, the
“Off” and “On”
Sliders
are used to
turn settings either off or on. To
toggle between off and on, tap the Slider; the Slider
will autmatically move between the “X” (off) and the
checkmark (on).
Slider Bar
Use the
slider bar
to adjust various settings,
including
Exposure
,
Aperture
,
Histogram
,
Focus
and
Zoom
(if applicable). To adjust the settings, do
one of the following:
Press and drag the marker (small triangle) to the
desired position;
Touch anywhere along the gray slider bar and
the marker will automatically “snap” to that
position (not applicable to Histogram);
or
Press the
“+”
and
“–”
buttons to make fine
adjustments to the settings (not applicable to
Histogram).
Minimize
and
Close
Press the
Minimize
(“
_
”) button in the upper-right
corner of the screen to minimize the software.
Press the
Close
(“
X
”) button in the upper-right corner
of the screen to close the software. If any unsaved
images are open prior to closing the software, the
user will be prompted to choose one of the following:
1. Save the current image
2. Not save the current image
3. Cancel closing the software
4. Save none of the images
5. Save all images
The user will also be prompted to
Save Selected
Format
or
Save Selected & Original Formats
. See
Marker
