Utax P-C2665 MFP User Manual Fax System Download Page 78

Page: 78 / 202

FAX Operation (Advanced)

4-20

Press the





key to select [All day] or [Preset

Time].

Press the

key. Proceed to the next step if you

selected [Preset Time] in step 10.

Press the





key to move the cursor position,

and enter the hours and minutes of the start time.

Press the

key.

Press the





key to move the cursor position,

and enter the hours and minutes of the end time.

Press the

key.

NOTE:

Enter the time on the 24 hours system.

File Format Setting (for Each Requirement)

If you are sending the file as an E-mail attachment or transferring it to a folder (SMB or FTP), select PDF, TIFF,
or XPS as the file format.

Press the

System Menu/Counter

key.

Press the





key to select [FAX].

Press the

key.

Press the





key to select [Reception].

Press the

key.

Press the





key to select [Forward Settings].

Press the

key.

Forward Time:

*********************

Preset Time

*All day

Reception:

Rings(TAD)

Rings(FAX/TEL)

*********************

[ Exit ]

Forward Settings

Summary of Contents for P-C2665 MFP











































































































































































































Search results

Summary of Contents for P-C2665 MFP

Reviews:

Related manuals for P-C2665 MFP

Brands by name

Popular brands

Utax P-C2665 MFP, User Manual Fax System

Search results

Summary of Contents for P-C2665 MFP

Reviews:

Related manuals for P-C2665 MFP

Brands by name

Popular brands