manualshive.com logo in svg

Utax P-C2665 MFP, User Manual Fax System

Share
Download
Utax P-C2665 MFP User Manual Fax System Download Page 16

Part Names and Functions 

1-2

Operation Panel

For the names of keys and indicators required when functions other than FAX are used, refer to the machine’s

 

Operation Guide

.

Blinks while the 

machine is 

accessing the 

memory.

Message Display. Check what is shown 

here while operating the machine. 

Blinks during printing and 

transmission/reception.

Selects the menu displayed 

at the lower left in the 

Message Display.

Selects the menu displayed 

at the lower right in the 

Message Display.

Switches between on-hook and off-hook when 

manually sending a FAX.

Shifts to switch the one-touch key numbers 

(1 to 11 and 12 to 22). 

Lamp is lit while shifted (12 to 22).

Destinations can be checked and added.

Calls the previous destination. Also used to enter a 

pause when entering a FAX number.

Displays the Address Book screen, where you can add destinations.

Used to call destinations 

registered to the one-touch key 

numbers (1 to 22).

Also used to register and 

delete call destinations.

Displays the 

Copy screen.

Displays the FAX screen.

Displays the Send screen.

Displays the Document Box screen.

Displays the Status/Job Cancel 

screen.

Displays the System Menu/Counter 

menu screen.

Not used in fax mode.

Summary of Contents for P-C2665 MFP











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands