manualshive.com logo in svg

Utax P-C2665 MFP, User Manual Fax System

Share
Download
Utax P-C2665 MFP User Manual Fax System Download Page 17

Part Names and Functions 

1-3

1

Lit when the machine's 

main power is on.

Used to register or recall 

programs.

Ends operation (logs out) 

on the Administration 

screen.

Puts the machine to sleep or wakes it up.

Cancels the printing job in progress.

Resets settings and displays the 

basic screen.

Starts sending operations and processing for setting operations.

Clears entered numbers and characters.

Numeric keys.

Enter numbers and symbols.

Displays the function menu for FAX.

Used to select a menu item, move the cursor when 

entering characters, change a value, etc.

Returns the Message Display to the 

previous screen.

Lights or blinks when an error occurs.

Selects the chosen item or finalizes the 

entered value.

Summary of Contents for P-C2665 MFP











































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands