Utax CLP 3526 Instruction Handbook Manual Download Page 113

Page: 113 / 156

4.2 Print Quality Problems

4-5

Dirt on the top edge or back of the paper

Clean the main charger.

Open the printer front cover. Pull the green cleaning
knob slowly in and out a few times. For full details,
see

5.3.2 Cleaning the Main Charger Unit on page

5-7

Check the inside of the paper transfer unit. Pull out
the paper transfer unit, and make sure there is no
toner or other foreign matter on the registration
roller.

Check the transfer belt.

If the transfer belt is dirty with toner, try printing
several pages.

Printing incomplete or out of position

Check that the application software is correctly
operated.

color shear

Conduct color registration using the printer opera-
tor panel. For full details, see

Chapter 3 Using the

Operator Panel, section 3.13.14 Color Registration
on page 3-65

Printed Results

Corrective Action

Table 4-2 (Continued)

Transfer belt

Summary of Contents for CLP 3526





























































































































































Search results

Summary of Contents for CLP 3526

Reviews:

Related manuals for CLP 3526

Brands by name

Popular brands

Utax CLP 3526, Instruction Handbook Manual

Search results

Summary of Contents for CLP 3526

Reviews:

Related manuals for CLP 3526

Brands by name

Popular brands