Utax CLP 3526, Instruction Handbook Manual

Page: 100 / 156

3.13 Other Modes
3-60
5 55 5
To change the timeout time, press the ENTER key. A
blinking cursor (
_
) appears.
6
66
6
Press the
U
or
V
key to increase or decrease the
value at the blinking cursor and set the desired time.
The timer can be set between
5
and
240
min, in
5-minute increments. Use the Z and Y keys to move
the cursor right and left.
7 77 7
When the desired timeout time is displayed, press the
ENTER key.
8 88 8
To exit the menu selection, press the MENU key.
3.13.4 Received Data Dump
You can print data received by the printer as hexadecimal
code for debugging programs and files.
1 11 1
Press the MENU key.
2 22 2
Press the
U
or
V
key repeatedly until
Others >
appears.
3
33
3
Press the Z key.
4 44 4
Press the U or V key repeatedly until
> Print
HEX-DUMP
appears.
5 55 5
Press the ENTER key. A question mark (
?
) appears.
6 66 6
Press the ENTER key again. The message
Processing
appears for a second, followed by
Waiting
.
7 77 7
While the message display is indicating
Waiting
,
send data to be hex-dumped to the printer. The
message display indicates
Processing
while the
data is being received.
You can cancel printing of any more dump data by
pressing the
GO key and then the CANCEL key.
8 88 8
Once all data has been received, the message
Waiting
will appear. Press the
GO
key to finish
hex-dump printing.
3.13.5 Printer Resetting
The procedure described below resets the printer’s temporary
conditions, such as the current page orientation, font, etc., set
by commands to their default values. Downloaded fonts and
macros are deleted from the printer’s memory.
1
11
1
Press the
MENU
key.
2
22
2
Press the U or V key repeatedly until
Others >
appears.
3 33 3
Press the Z key.
4 44 4
Press the
U
or
V
key repeatedly until
>Printer
Reset
appears.
>Sleep Timer
030min.
Others >
>Print HEX-DUMP
>Print HEX-DUMP?
Processing
Waiting
Others >
>Printer Reset