Utax CLP 3526, Instruction Handbook Manual

Page: 105 / 156

3.13 Other Modes
3-65
2 22 2
Press the
U
or
V
key repeatedly until
Others >
appears.
3
33
3
Press the
Z
key.
4
44
4
Press the U or V key repeatedly until
>Color/
Mono. mix
appears.
5 55 5
Press the
ENTER
key. A blinking question mark (?)
appears.
6
66
6
Press the
U
or
V
key to select the setting you want.
7
77
7
Press the
ENTER
key.
8
88
8
Press the
ENTER
key. This display returns to
Ready
.
3.13.14 Color Registration
Perform the following procedure for color registration in case
of color shear.
Note
A Color Registration Correction Chart will be
printed out in A3 size paper when performing
the procedure for color registration. Set A3 size
paper into paper cassette before proceeding.
1 11 1
Press the
MENU
key.
2
22
2
Press the
U
key repeatedly until
Others >
appears
in the message display.
3
33
3
Press the Z key.
4 44 4
Press the U key repeatedly until
>Color
Registration >
appears.
5 55 5
Press the
Z
key.
6 66 6
>>Print Regist Chart
appears.
7
77
7
Press the
ENTER
key. A question mark (
?
) appears.
8 88 8
Press the ENTER key. A Color Registration
Correction Chart (shown) will be printed out.
Calibration is done using the left (L), right (R) and
horizontal (H) scales in cyan, magenta and yellow
colors by adjusting corresponding values displayed in
the following steps.
Figure 3-16
Others >
>Color/Mono. mix
>Color/Mono. mix
? Auto
>Color >
Registration
>>Print
Regist Chart
>>Print
Regist Chart ?