4.3 Error Messages
4-7
Check
feed unit
The feed unit of the optional paper feeder is not installed correctly. Open the
paper feeder paper cassette and correct the problem. This message appears
only when the PF-647 paper feeder is installed on the printer.
Clean printer
press GO
Clean the registration roller or main charger unit and then press the
GO
key.
For details about cleaning,
5.3.1 Cleaning the Registration Roller on page
5-7
.
Close
finisher cover
The cover of the optional document finisher (DF-600/610) is open. Close
the cover.
Close
front cover
The front cover is open. Close the cover.
Close
left cover
The left cover of the printer is open. Close the cover.
Close
right cover #
The indicated right cover of paper feeder is open. Covers are indicated by
values in place of
#
, from 1 (topmost) to 3 (bottom). Close the applicable
cover.
Duplex disabled
Press GO
You trying to perform duplex printing while a paper size and/or type that is
not allowed for duplex printing is selected. Press the
GO
key to print on one
side of the paper only.
Duplex drawer
not loaded
The duplex drawer of the optional Duplex Unit is not inserted correctly.
Correct the problem and try again.
Face-down tray
paper full
The face-down tray(which can hold approximately 500 sheets) is full.
Remove all printed pages from the face-down tray. The printer will resume
printing to the face-down tray when it detects that it is empty.
Feed unit
not loaded
The feed unit of the optional paper feeder is not installed. Open the paper
feeder paper cassette and correct the problem. This message appears only
when the PF-647 paper feeder is installed on the printer.
File not found
Press GO
The data you are trying to print from a virtual mailbox does not exist, or the
virtual mailbox you specified does not exist. If Auto Continue is turned on,
printing will resume resumed after a preset amount of time. For details about
Auto Continue, refer to
3.10.8 Overriding Difference between A4 and Letter
on page 3-53
Finisher tray ##
paper full
The indicated (
##
) tray of the optional document finisher (DF-600/610) is
full. Remove all printed pages from the tray.
Finisher
path error
The optional document finisher (DF-600/610) is not installed properly. Cor-
rect the problem, referring to the instructions supplied with the document
finisher.
Format error
Memory Card
The memory card in printer's card slot is not formatted. To format a memory
card, perform the procedure under
Formatting a memory card on page
3-42
.
Format error
Hard disk
The hard disk installed in the printer is not formatted. Format the hard disk
following the procedure in the hard disk Installation Guide.
Hard disk err
##
Press GO
A hard disk error of the type indicated by the error code that appears in place
of
##
has occurred. Refer to
Storage error codes on page 4-11
for informa-
tion about error codes. To ignore the hard disk error, press the
GO
key.
Message
Corrective Action
Table 4-3 (Continued)
Summary of Contents for CLP 3526
