Utax CLP 3526 Instruction Handbook Manual Download

Page: 49 / 156

3.2 Using the Menu Selection System

3-9

Selecting a menu

The mode selection menu is hierarchical. Press the

key to display the desired menu.

•

If the selected menu has a sub-menu,

is displayed after the menu.

Press the

key to move to the sub-menu or

key to go back.

•

is displayed before the sub-menu.

Press the

key to move to another sub-menu or

key to go back.

•

is displayed before the second sub-menu.

Setting a menu

Select the desired menu and press the

ENTER

key to set or change the configuration.

Press the

key to display the desired item and the

ENTER

key to finalize the value

or selections set.

Cancelling menu selection

If you press the

MENU

key when selecting a menu, the message display returns to

Ready

Note

Settings that are received from application software and the printer driver will take
priority over settings made in the operator panel.

Paper Handling >

Indicates that there is a sub-menu

>Type Adjust >

Indicates that there is another sub-menu

Indicates that this is the sub-menu

>>Paper Weight
Normal

Indicates that this is the second sub-menu

Summary of Contents for CLP 3526





























































































































































Search results

Summary of Contents for CLP 3526

Reviews:

Related manuals for CLP 3526

Brands by name

Popular brands

Utax CLP 3526, Instruction Handbook Manual

Search results

Summary of Contents for CLP 3526

Reviews:

Related manuals for CLP 3526

Brands by name

Popular brands