manualshive.com logo in svg

Utax CDC 1725, Instruction Handbook Manual

Share
Download
Utax CDC 1725 Instruction Handbook Manual Download Page 54

Preparation before Use

2-18

Sending E-mail

Specifying the SMTP settings allows you to send images loaded onto this machine as E-mail attachments. 

To use this function, this machine must be connected to a mail server using the SMTP protocol.

Before sending images loaded onto this machine as E-mail attachments, check the following:

•

The network environment used to connect this machine to the mail server
A full-time connection via a LAN is recommended.

•

SMTP Settings
Use Embedded Web Server to register the IP address or host name of the SMTP server.

•

If limits have been set on the size of E-mail messages, it may not be possible to send very large E-mails.

The procedure for specifying the SMTP settings is explained below.

1

Click Advanced -> SMTP -> General.

Summary of Contents for CDC 1725





















































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands