Utax CDC 1725 Instruction Handbook Manual Download Page 181

Page: 181 / 436

Sending Functions

5-13

Use the procedure below to select the file format for transmission.

Press the

Send

key.

Place the originals on the platen.

Press [Original/Sending Data Format] and then
[File Format].

Select the file format from [PDF], [TIFF], [JPEG],
[XPS], and [High Comp. PDF].

When the color mode in scanning has been
selected for Grayscale or Full Color, set the image
quality.

If you selected [PDF] or [High Comp. PDF], press
[Encryption] and specify the encryption settings.

Press [OK].

Specify the destination, and press the

Start

key to

start sending.

File Separation

Create several files by dividing scanned original data page by page, and send the files.

Use the procedure below to split scanned original data into separate files when sending scanned originals.

Press the

Send

key.

Place the originals on the platen.

Press [Original/Sending Data Format] and then
[File Separation].

Press [Each Page] to set File Separation.

Press [OK].

Specify the destination, and press the

Start

key.

The scanned original is sent after being divided into
files of one page each.

NOTE:

Three-digit serial number such as

abc_001.pdf, abc_002.pdf... is attached to the end of
the file name.

Image Quality

File Format

Encryption

Off

TIFF

PDF

JPEG

High Comp.
PDF

Ready to send.

Destination

Place original.

Status

08/08/2009 10:10

Cancel

Add Shortcut

Preview

Original

Zoom
Send

100%
---

:
:

---

XPS

Compression
Ratio Priority

Standard

Quality
Priority

Place original.

File Separation

Create and send a file for each page
of the original that was read.

Off

Each Page

Cancel

Add Shortcut

Status

08/08/2009 10:10

Preview

Original
Zoom
Send

100%
---

:
:
:

---

Place original.

Ready to send.

Destination

Summary of Contents for CDC 1725





















































































































































































































































































































































































































































Search results

Summary of Contents for CDC 1725

Reviews:

Brands by name

Popular brands

Utax CDC 1725, Instruction Handbook Manual

Search results

Summary of Contents for CDC 1725

Reviews:

Brands by name

Popular brands