Utax CDC 1725, Instruction Handbook Manual

Page: 379 / 436

Management
11-13
11
1
Press the System Menu key.
2
Press [User Login/Job Accounting].
3
If user login administration is disabled, the user
authentication screen appears. Enter your login
user name and password and then press [Login].
For this, you need to login with administrator
privileges. Refer to
Adding a User on page 11-5 for
the default login user name and password.
4
Press [Next] of User Login Setting , [Change] of
Obtain NW User Property .
5
Press [On].
6
Press [Server Name].
7
Enter the LDAP server name or the IP address and
press [OK].
8
Press [# keys] to enter the LDAP port number using
the numeric keys.
9
Press [Name 1].
10
Enter the LDAP Attribute to obtain the user name to
be displayed and press [OK].
11
Follow steps 9 and 10 above to set Name 2 .
12
Press [E-mail Address].
13
Enter the LDAP Attribute to obtain the e-mail
address and press [OK].
14
Press [Search Timeout] to set the amount of time to
wait before time-out.
15
Press [+], [-] or the numeric keys to enter the time.
16
Press [LDAP Security] to select the type of
encryption according to the type of security
employed by the LDAP server.
17
Select [Off], [LDAP over SSL], or [LDAPv3/TLS]
and press [OK].
User Login/Job Accounting - Network User Property
Get the network user information.
On
Off
Cancel OK
Server Name
Search
Timeout
LDAP
Security
# Keys
Name 2
Name 1
10/10/2008 10:10
Status
E-mail Address
LDAP Server Information:
Port:
Acquisition of User Information:
displayName
mail
192.181.11.11
389
30
Off
sec.