Utax CD 5230 Facsimile Manual Download Page 49

Page: 49 / 177

FAX Operation (Basic)

3-22

Press [Yes] (the

Left Select

key). This deletes the

selected destination or group.

Press the

key.

Press [Yes] (the

Left Select

key). The change or deletion

of the registration contents is reflected on the Address
Book.

Printing Address List

You can print the list of destinations registered in the Address Book.

You can sort the list in the order of names or address numbers of the destinations.

Press the

System Menu/Counter

key.

Press the

key to select [Edit Destination].

Press the

key.

Press the

key to select [Print List].

Press the

key.

Press the

key to select [FAX List(Index)] or [FAX

List(No.)].

Press the

key.

Press [Yes] (the

Left Select

key). The list is printed.

Summary of Contents for CD 5230


















































































































































































Search results

Summary of Contents for CD 5230

Reviews:

Brands by name

Popular brands

Utax CD 5230, Facsimile Manual

Search results

Summary of Contents for CD 5230

Reviews:

Brands by name

Popular brands