manualshive.com logo in svg

Utax CD 5230, Facsimile Manual

Share
Download
Utax CD 5230 Facsimile Manual Download Page 13

xi

Conventions in This Guide

The following conventions are used depending on the nature of the description.

Convention

Description

Example

Bold

Indicates the operation panel 
keys or a computer screen.

Press the 

Start

 key.

[Regular]

Indicates a selection item on the 
Message Display.

Select [System].

Italic

Indicates a message displayed 
on the Message Display.

Ready to copy

 is displayed.

Used to emphasize a key word, 
phrase or references to 
additional information.

For more information refer to 

Sleep and 

Auto Sleep on page 3-5

.

Note

Indicates supplemental 
information or operations for 
reference.

NOTE: 

Important

Indicates items that are required 
or prohibited so as to avoid 
problems.

IMPORTANT: 

Caution

Indicates what must be 
observed to prevent injury or 
machine breakdown and how to 
deal with it.

CAUTION: 

Summary of Contents for CD 5230


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands