manualshive.com logo in svg

Utax CD 5230, Facsimile Manual

Share
Download
Utax CD 5230 Facsimile Manual Download Page 16

1

Part Names and Functions

1-3

Lit when the machine's 

main power is on.

Used to register or recall 

programs.

Ends operation (logs out) 

on the Administration 

screen.

Puts the machine to sleep or 

wakes it up.

Cancels the printing job in progress.

Resets settings and displays the 

basic screen.

Starts sending operations and processing for setting operations.

Clears entered numbers and characters.

Numeric keys.

Enter numbers and symbols.

Displays the function menu for FAX.

Used to select a menu item, move the cursor when 

entering characters, change a value, etc.

Returns the Message Display to the 

previous screen.

Lights or blinks when an error occurs.

Selects the chosen item or finalizes the 

entered value.

Blinks while the machine is accessing the memory.

Summary of Contents for CD 5230


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands