Utax CD 5230 Facsimile Manual Download Page 131

Page: 131 / 177

Setup and Registration

6-20

Use the numeric keys to enter a Reject FAX number. Up
to 32 digits can be entered.

NOTE:

Press the

Address Recall/Pause

key to insert a

pause (-) between two digits.
Press the

key to move the cursor.

To correct the number, press the

Clear

key to delete the digits

one by one before reentering the number. To delete all
entered digits and return to the default screen, press the

Reset

key.

Press the

key.

To register other Reject FAX numbers, repeat steps 8 to
12.

Changing and Deleting Reject FAX No.

Follow steps 1 to 7 of

Registering Reject FAX No. on

page 6-19

Press the

key to select the Reject FAX No. to be

changed or deleted.

Press [Menu] (the

Right Select

key).

Changing Reject FAX No.

Press the

key to select [Detail/Edit].

Press the

key.

Use the numeric keys to reenter the Reject FAX
number. Up to 32 digits can be entered.

NOTE:

Press the

Address Recall/Pause

key to insert a

pause (-) between two digits.
Press the

key to move the cursor.

To correct the number, press the

Clear

key to delete the digits

one by one before reentering the number. To delete all
entered digits and return to the default screen, press the

Reset

key.

Press the

key.

FAX No. Entry:

Reject No. List:

*********************

0667643755
0120123456

[ Menu

]

0667640001

Menu:

*********************

Delete

Add FAX Number

Detail/Edit

FAX No. Entry:

0667640001

Summary of Contents for CD 5230


















































































































































































Search results

Summary of Contents for CD 5230

Reviews:

Brands by name

Popular brands

Utax CD 5230, Facsimile Manual

Search results

Summary of Contents for CD 5230

Reviews:

Brands by name

Popular brands