Utax CD 5230 Facsimile Manual Download Page 23

Page: 23 / 177

Preparation Before Use

2-4

Setting the TTI information

Register the name (local FAX name), fax number, and local FAX ID printed in the transmit terminal identification (TTI)
area.

By registering the TTI data, the receiver can easily find out where the FAX came from.

Local FAX Name Registration

NOTE:

To change the entry, follow the same operation.

Press the

System Menu/Counter

key.

Press the

key to select [FAX].

Press the

key.

Press the

key to select [Transmission].

Press the

key.

Press the

key to select [Local FAX Name].

Press the

key.

Enter the

Local FAX Name

to be registered. Up to 32

characters can be entered.

NOTE:

For details on character entry, refer to

Specifications

(Fax function) on Appendix-6

Press the

key.

Local FAX Information Entry

Register the local FAX information (local FAX number/ID) printed on in the transmit terminal identification (TTI) area.
The Local FAX ID is used for transmission limit purposes. (Refer to

Transmission Restriction on page 6-16

Press the

System Menu/Counter

key.

Press the

key to select [FAX].

Press the

key.

Press the

key to select [Transmission].

Press the

key.

When you register the Local FAX Number, go to next
step. When you register the Local FAX ID, go to step 10.

Local FAX Number Entry

Press the

key to select [Local FAX Number].

Local FAX Name:

ABC

[ Text ]

Summary of Contents for CD 5230


















































































































































































Search results

Summary of Contents for CD 5230

Reviews:

Brands by name

Popular brands

Utax CD 5230, Facsimile Manual

Search results

Summary of Contents for CD 5230

Reviews:

Brands by name

Popular brands