manualshive.com logo in svg

Utax CD 5230, Facsimile Manual

Share
Download
Utax CD 5230 Facsimile Manual Download Page 114

Setup and Registration

6-3

6

1

The connected telephone set makes a ringing tone. Note 
that if [0] (zero) is set as the number of rings (for FAX/
TEL Auto Switch), the connected telephone does not 
ring.

NOTE: 

You can change the number of times the ringing 

tone rings. (Refer to 

Rings on page 6-7

.)

2

When the call is from a telephone

1

The machine makes a ringing tone urging the user 
to respond. Lift the handset of the telephone within 
30 seconds.

NOTE: 

If you do not lift the handset within 30 seconds, the 

machine switches to fax reception.

2

Talk to the other party.

NOTE: 

At the end of the conversation, you can manually 

receive the originals. (Refer to 

Manual Reception on page 4-

9

.)

When the call is from a fax

The machine starts receiving fax originals.

Summary of Contents for CD 5230


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands