manualshive.com logo in svg

Utax CD 5230, Facsimile Manual

Share
Download
Utax CD 5230 Facsimile Manual Download Page 159

Appendix-2

Character Entry Method

In character entry screens, use the procedure below to enter characters.

Keys Used

Use the following keys to enter characters.

1. OK Key

Press this key to finalize the entered character(s).

2. Clear Key

Press this key to delete the character at the cursor position. If the cursor is at the end of the 
line, the character to the left of it is deleted.

3. Back Key

Press this key to return to the screen from which you invoked the character entry screen.

4. Cursor Keys

Use these to select the entry position, or select a character from the character list.

5. Numeric Keys

Use these keys to select the character you want to enter.

6. Reset Key

Press this key to cancel the character entry procedure and return to the standby screen.

7. Right Select Key

Press this key to select the type of characters you want to enter. (When [Text] is displayed)

1

2

3

4

7

6

5

Summary of Contents for CD 5230


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands