Utax CD 5230 Facsimile Manual Download Page 150

Page: 150 / 177

About Network FAX

7-3

Setup

The following preparation is needed before using Network FAX.

Flow of Setup

Connection to a PC

Connect the machine to a PC using the network cable. For details, refer to the machine’s

Operation Guide

Machine Registration

Using the memory transmission function, select the recipient PC or file format.

NOTE:

Use the memory transmission function to forward the received fax to the PC or forward it as an e-mail

attachment. For details, refer to

Printing/Forwarding Received Documents (Memory Forwarding) on page 4-13

Installing Software on the PC

Install the dedicated software (included in the supplied CD-ROM) on your PC required to use Network FAX. For
details, refer to the

Network FAX Driver Operation Guide

contained in the included CD-ROM.

Network FAX Driver Operation Guide

The

Network FAX Driver Operation Guide

(Online Manual) is contained in the included CD-ROM in PDF (Portable

Document Format). The main contents include the following.

• Installing Network FAX Driver
• Performing Network FAX Sending
• Specifying the Network FAX Transmission Settings
• Specifying the Cover Letter Settings

Opening the Online Manual

Follow the steps below to refer to the online manual.

Insert the CD-ROM supplied with the machine into the
CD-ROM drive.

An explanation of the licensing

agreement

is displayed. If you agree to the terms of the

agreement, click

Accept

. The main menu screen then

appears.

Click

Software Documentation

, and then

Network FAX

Driver

. The online manual appears.

NOTE:

Adobe Reader 8.0 or later needs to be installed to

view the online manual.

Summary of Contents for CD 5230


















































































































































































Search results

Summary of Contents for CD 5230

Reviews:

Brands by name

Popular brands

Utax CD 5230, Facsimile Manual

Search results

Summary of Contents for CD 5230

Reviews:

Brands by name

Popular brands