manualshive.com logo in svg

Utax CD 5230, Facsimile Manual

Share
Download
Utax CD 5230 Facsimile Manual Download Page 149

About Network FAX

7-2

What is Network FAX?

The Network FAX function enables any PC, which is networked to the machine, to perform sending and receiving of 
faxes. Its primary features include the following.

• PC-prepared document can be sent and received by fax without being printed out.
• An Address Book (in the machine/PC) can be used to specify a desired destination.
• Addition of a cover page.
• Transmission and printing can be done simultaneously.
• E-mail reporting of the transmission result.
• Sub address transmission is available.
• Operation is as simple as printing.

Flow of Network FAX Sending

Network FAX sending is performed in the following sequence.

Flow of Network FAX Receiving

Network FAX receiving is performed in the following sequence.

NOTE: 

The memory forwarding function allows not only reception by the networked PC, but also forwarding of the 

received fax by e-mail, forwarding to another fax machine.

Prepare a document using a PC networked to this machine.

T

Forward the document data from the PC to this machine using the same 
operation as for printing.

T

The machine sends the document data to another fax machine.

T

The other fax machine receives the data.

Another fax machine sends a fax to this machine.

T

The machine receives the fax.

T

The machine sends the fax data to a networked PC using the memory 
forwarding function.

T

The PC networked to this machine receives the data.

Summary of Contents for CD 5230


















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands