manualshive.com logo in svg

Utax CD 5130, User Manual

Share
Download
Utax CD 5130 User Manual Download Page 350

10-2

Troubleshooting 

Solving Malfunctions

The table below provides general guidelines for problem solving.

If a problem occurs with your machine, look into the checkpoints and perform procedures indicated on the following 
pages. If the problem persists, contact your Service Representative.

Symptom

Check Points

Corrective Actions

Reference 

Page

The operation panel 
does not respond 
when the power 
switch is turned on.

Is the machine plugged in?

Plug the power cord into an AC 
outlet.

—

Pressing the Start key 
does not produce 
copies.

Is there a message on the 
Message Display?

Determine appropriate response to 
the message and respond 
accordingly.

—

Is the machine in Sleep 
mode?

Press the any key on the operation 
panel to recover the machine from 
Sleep mode. The machine will be 
ready to copy within 15 seconds.

2-7

Blank sheets are 
ejected.

Are the originals loaded 
correctly?

When placing originals on the 
platen, place them face-down and 
align them with the slit glass.

2-52

When placing originals in the 
document processor, place them 
face-up.

2-53

Printouts are too light.

Is the machine in Manual 
Density mode?

Select the correct density level.

5-11

When changing the default density 
level, adjust the density manually 
and choose the desired level.

—

Is the toner distributed evenly 
within the toner container?

Shake the toner container from 
side to side about several times.

9-5

Is there a message indicating 
the addition of toner?

Replace the toner container.

9-5

Is the paper damp?

Replace the paper with new paper.

2-39

Is EcoPrint mode enabled?

Disable EcoPrint mode.

4-8

—

Make sure the paper type setting is 
correct the paper being used.

8-12
8-14

Printouts are too dark.

Is the machine in Auto 
Density mode?

Set the correct density level for 
auto density.

—

Is the machine in Manual 
Density mode?

Select the correct density level.

5-11

Copies have a moire 
pattern (dots grouped 
together in patterns 
and not aligned 
uniformly).

Is the original a printed 
photograph?

Set the image quality to [Photo].

5-10

Printouts are not 
clear.

Did you choose appropriate 
image quality for the original?

Select appropriate image quality.

5-10

Summary of Contents for CD 5130























































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands