Utax 206ci, User Manual

Page: 330 / 382

10-14
Troubleshooting > Responding to Messages
Responding to Messages
If the touch panel or the computer displays any of these messages, follow the corresponding procedure.
A
B
Message Checkpoints Corrective Actions Reference
Page
Acceptable staple count
exceeded.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Is the acceptable staple count
exceeded? For details, refer to
Document Finisher (option) on
page 11-22
.
Press [Continue] to print without
stapling.
Press [Cancel] to cancel the job. —
Activation error. — Turn the main power switch off and on. If
the error exists, contact administrator. 2-12
Add the following paper in
cassette #. Is the indicated cassette out of
paper? Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source. 3-3
Add the following paper in the
multi purpose tray. Is the paper of the selected size
loaded in the multi purpose tray? Load paper.
Press [Paper Selection] to select the
other paper source.
Press [Continue] to print on the paper in
the currently selected paper source. 3-5
Does the paper size set for the
paper source matches the paper
size that was actually loaded? Press [Continue] to continue printing.
Press [Cancel] to cancel the job. —
Adjusting Scanner. — The machine is under the adjustment to
maintain its quality. Please wait. —
Adjusting… — The machine is under the adjustment to
maintain its quality. Please wait. —
Message Checkpoints Corrective Actions Reference
Page
Box limit exceeded.*
* When Auto Error Clear is set to [On], processing resumes automatically after a set amount of time elapses.
Is [End] displayed on the touch
panel? Document box is full, and no further
storage is available; Job is canceled.
Press [End]. Try to perform the job again
after printing or deleting data from the
Document Box. —