urmet domus Note 2 1723 Series, Configuration Booklet

Page: 6 / 48

6 DS1723-024
Use the fi rst three lines to specify which are the cameras present to the video door phone:
The one or ones on the call stations (identi fi cation: 1 and possibly 2).
The total number of those connected to the interface (identi fi cation: 3,4,5,6).
The local one (identi fi cation: 7).
The fourth line can be used to specify whether or not you want a cyclic view on the cameras present:
Set to 0 (default) to disable cyclic view.
Set cycle time greater than zero, instead, to have the system automatically show the next camera image at the
end of this time. The user can disable/enable cyclic view at any time.
On the fi fth line, you can specify the duration of the video clips that the user can store when controlling the
camera.
Finally, tap on the
icon on the top right you can assign speci fi c names to the various controlled cameras:
The set names will appear superimposed on the image during the control phase.
The following characters, although available on the keyboard, cannot be used in the camera names: \ / : *
? “ < > | _
When multiple video door phones are present, different parameters can be set on different video door
phones. During the camera control phase, the parameters of the current video door phone are used.
HOME AUTOMATION SETTINGS
Each single video door phone has:
Max. 8 buttons Yokis, equivalent to those of a Yokis remote control: BTN1...BTN8.
Max. 6 composite buttons: Comp.BTN1...Comp.BTN6.
Max. 2 buttons for operating local contacts: Contact1, Contact2.
To con fi gure the home automation part, using the icon on the top right, select the ‘Installer’ menu,
type in the password (‘1937’) and select ‘Home Automation’.
—
—
—
—
—
—
—
—