40
DS1723-024
Using the keyboard, de
fi
ne the number of pulses to be sent to the receiver module with the speci
fi
c button, e.g.
to con
fi
gure the receiver timing. Then press ‘Enter’ and wait for the noti
fi
cation of the receiver, typically shown on
the receiver (
fl
ashes or small movements).
See the manual of the single receiver modules for the possible controls.
For example, if a MTR2000ER relay module was ‘connected’ and you want its output to be timed for 15 minutes
(e.g. to water the garden), then:
Send 23 (
E
23
) to unlock the con
fi
guration of the module and wait for 3
fl
ashes on the receiver.
Send 27 (
E
27
) to switch the mode to timer mode and wait for 7
fl
ashes on the receiver.
Send 26 (
E
26
) to con
fi
gure the time in minutes and wait for 6
fl
ashes on the receiver.
Send 14 (
E
14
) to set the timer to 15 minutes and wait for 4
fl
ashes on the receiver.
Send 21 (
E
21
) to unlock the con
fi
guration of the module and wait for 1
fl
ash on the receiver.
If instead you want the connected MTR2000ER module functions to work in pulse mode (i.e. for the module to
generate a 0.5 second pulse whenever the button is pressed), e.g. to control the opening of a gate, then:
Select the ‘M’ mode, by sending 10 pulses:
M
Then send 16 (
16
) to con
fi
gure pulse mode and wait for 6 con
fi
rmation
fl
ashes on the LED of the video door
phone
As previously mentioned, the receiver modules con
fi
guration only works if the button is connected
to a single receiver module.
—
—
—
—
—
—
—
Summary of Contents for Note 2 1723 Series
Page 47: ...47 DS1723 024...
