urmet domus Note 2 1723 Series, Configuration Booklet

Page: 36 / 48

36 DS1723-024
Select the fi rst item, ‘Set Button Name’, to assign a mnemonic name to the button using the keyboard:
Select ‘OK’ to con fi rm.
Some background information may be useful before describing the remaining four items in detail.
The button con
fi guration procedure is similar to that of the buttons of a Yokis eight-button remote control. The
video door phone automatically sends the pulses needed for the con fi guration, without which the installer needing
to remember the number of pulses required in the various cases (these are shown in the text for the sake of
convenience of reading).
For example, if you choose to ‘connect’ a button to a receiver, the video door phone will send
fi ve short con fi guration
presses.
The green LED on the video door phone
corresponds to the red LED of a Yokis remote control: the noti fi cation
fl ashes can be seen on it. The expected number of fl ashes is shown on the display so the installer can check
easily.
WARNING. Some con fi gurations may last a few seconds. Always wait for the noti fi cation fl ashes
before moving to another.
The following is present on the right side of the main page of the con fi guration of each button:
a 'Test' button for immediately checking the behaviour of the button at the end of a con fi guration;
a 'Reset' button for starting back from scratch by resetting the speci fi c button (and only that button) like on a
Yokis remote control. Intentionally, resetting the single button does not change its name.
It is always possible to go back to the upper level menu, by pressing the button .
Now will be examine the four items which can be selected.
•
•