43
DS1723-024
ANNEX C
How to con
fi
gure the composite buttons
The composite buttons can be used to control multiple Yokis buttons at the same time. In practice, for the end
user, pressing a composite button will be equal to pressing the single Yokis buttons it consists of in sequence.
IMPORTANT The scenarios which can be achieved with the Yokis buttons, e.g. simultaneously
controlling up to four receiver modules in direct mode or with centralised controls
(lighting or shutters). This is possible even more
fl
exibly using the Yokis PRO app.
The composite buttons constitute a possible higher degree of aggregation.
Example:
You may have con
fi
gured one Yokis button to control the centralised locking of all the shutters (‘Close All’), in
Radio Bus mode, and a second Yokis button to switch on the lights in the living room and kitchen (‘Living Room
and Kitchen Lights On’), in direct mode.
Now, you can de
fi
ne a composite button (‘Evening’) which recalls them both and consequently closes all the
shutters and at the same time switches on the lights in the living room and kitchen only.
The composite buttons are typical of Urmet video door phones and are not re
fl
ected in the Yokis PRO app.
WARNING
Obviously, at least two Yokis buttons must have been con
fi
gured before con
fi
guring a
composite button otherwise it would serve no purpose.
On the Home Page of the video door phone, press the ‘Con
fi
guration’ icon
select the ‘Installer’
button, enter the password (‘1937’), and then select the ‘Home Automation’ menu. You will be directed to the
following page:
Summary of Contents for Note 2 1723 Series
Page 47: ...47 DS1723 024...
