32
DS1723-024
ACCESS CONTROL
The kit comprises 5 transponder keys and 2 chip tags for electric lock activation.
The chip tag is the sensor contained inside the keys and can be attached to various objects of
daily use (keyholder, cell phone, watch. etc.).
To open the door, move a key or the object to which the chip tag has been attached close to the
name tags area of the call station (the correct point is indicated with ) as shown to the side.
The keys and the chip tag must be associated to the call station as indicated in paragraph
“Key memorisation procedure”.
If a valid key is presented, the call station emits a con
fi
rmation beep and activates the electric
lock. If an invalid key is presented, the call station emits a long beep and the electric lock is not
activated.
KEY MEMORISATION PROCEDURE
Only keys memorised can activate the electric lock connected to the call station. To memorise the keys:
1. Move the master key close to the call station;
2. The call station emits a con
fi
rmation beep;
3. Move the key or chip tag to be programmed close to the call station;
4. The call station emits two beeps to indicate that programming has been completed;
5. Repeat operations 3 and 4 for all the keys to be programmed;
Up to 21 keys can be programmed. If an attempt is made to program a twenty-second key, the call station
emits only one beep (instead of 2) to indicate that programming has not been performed.
6. Move the Master key close to the call station;
7. The call station emits three beeps to indicate exit from programming. In case of forgetfulness, the exit
programming mode will be done automatically after 30 seconds.
ACTIVE
NO ACTIVE
BEEP
BEEP BEEP
BEEP BEEP BEEP
Summary of Contents for Note 2 1723 Series
Page 47: ...47 DS1723 024...
