urmet domus Note 2 1723 Series, Configuration Booklet

Page: 5 / 48

5
DS1723-024
Check that dip-switch 5 is in the OFF position (default).
Connect the door lock to terminals SE+ and SE- (timed capacitive discharge).
Connect the two N.O. terminals (low power relay) to the gate opener input (all open).
If required, a button can be connected to the PA terminals to allow opening the door from the inside.
If required, a button can be connected in parallel to the N.O. terminals to allow opening the gate from the
inside.
2) House with automated gate only
You want to open the gate by pressing .
In this case:
Set dip-switch 5 to the ON position.
Connect the two N.O. terminals (low power relay) to the gate opener input (all open).
If required, a button can be connected in parallel to the N.O. terminals to allow opening the gate from the
inside.
3) House with double gate, one part of which you want to use as a pedestrian crossing.
You want to open the fi rst part of the gate by pressing and open the second only by pressing .
In this case:
Check that dip-switch 5 is in the OFF position (default).
Connect the terminals SE+ and SE- (timed capacitive discharge) to a decoupling relay and the output of the
decoupling relay
(3)
of the gate opener (open fi rst part input).
Connect the two N.O. terminals (low power relay) to the gate opener input (open second part input).
If required, a button can be connected to the PA terminals to allow opening the
fi rst part of the gate from
the inside.
If required, a button can be connected in parallel to the N.O. terminals to allow opening the second part
from the inside.
VIDEO SURVEILLANCE SETTING (E.G. FOR A WAITING ROOM)
A local camera can be connected to the video door phone (visible only from that same video door phone) and
other four cameras by means of the interface Ref. 1723/69.
In the ‘Con
fi guration’ menu which can be opened using the icon on the top right, select the ‘Installer’
menu, type in the password (‘1937’) and select ‘CCTV’.
The following will appear:
–
–
–
–
–
–
–
–
–
–
–
–
–
(3)
In France, model 9406 with timer can be used.