P a g e
| 3
ÜKY/Duopel Boilers User Manual
TRANSPORT AND CARRY
ÜNMAK ÜKY / DUOPEL series boilers are manufactured from welded thick sheet metal. Boilers are
packed in one piece.
1. Boiler Group: Boiler insulation and outer jacket are shipped dressed.
2. Accessories: Control panel, pump (pump is supplied for capacities below 60 kW power), user
manual with warranty certificate and boiler accessories are included in the boiler package.
Safe transportation of the product
DUOPEL group boilers are heavy products, so care
should be taken when moving the boiler to the
place where it will be installed. Therefore, the
equipment to be used to lift and transport the
product should be at a sufficient capacity.
In order not to damage the boiler outer sheets
and the boiler during transportation;
While carrying the rope on the forklifts on the chassis and carrying the boiler with the help of a crane
or hoist, care should be taken not to damage the painted thin sheets of the boiler and the
gearmotor-fan group under the hopper.
It is convenient to lift the boiler from the forklift stands or the transport ring on the boiler. The boiler
standing on the ground must be lifted directly without a puller. When carrying in cold weather, the
boiler should not be lifted suddenly in case the rope freezes from the cold.
Care should be taken not to damage the gearbox and fan under the hopper.
When removing the packaging around the boiler, hard and sharp objects should not be
used in order to prevent damage to the painted boiler plates underneath the packaging.
