P a g e
| 19
ÜKY/Duopel Boilers User Manual
START UP
The following steps should be followed for boiler start-up:
Check whether there is a visible glitch in the installation. If there is a malfunction, remove the malfunctions by
obtaining information from the "Information on Usage Errors" page.
Observe if the water decreases in the installation from the hydrometer.
If it does, add water.
Check for visible defects in the boiler's power line. If there is a malfunction, remove the malfunctions by
obtaining information from the "Information on Usage Errors" page.
To burn pellets with automatic feeding:
Fill the hopper with wood pellet and close the cap tightly.
Open the control panel by pressing the
ON / OFF button of the device
for 1 second. When turned on, values will appear next to Feed, Set Heat,
Standby variables on the blue graphic screen.
Since the
Gearmotor On / Off and
Fan On / Off button are not
pressed in the side display, CHECKUP is not visible and the boiler is running.
If the
Gearmotor On / Off and
Fan On / Off buttons are not
pressed for a certain period of time, it will ignite and feed first and then
continue firing. Feeling that the temperatures are not rising, it will either warn
"Ignition System Failed" or "Fuel Over".
Press the
Gearmotor On / Off and
Fan On / Off buttons. The
gearmotor and fan will be activated and will work to fulfill the boiler heating
functions.
