86
SLIP PRINTER (5)
SF-86 1/0 bit
1
0
a
Slip printer selection
[SF-83.h=1]
[00/11] TP-620 via ch-A (RS485) --- set also (SP-179)
b
[01] TP-822/832 or CBM-1000 with NA-710/730 via ch-A (RS485) --- set [SF-87.a,b, SF-107] also
[10] TM-T88III via ch-B (RS232C)
c
Operation prohibited until printing is finished on thermal slip printer TM-
T88III
[a,b=10]
permitted
[a,b=10]
d
Slip lower logo printed (not available for TP-620) (also see [SF-83.d])
not printed
e
# of blank lines between lower logo and last item line is 8 lines
[d=1]
0 line
f
# of blank lines between lower logo and last item line is 4 lines
[d=1]
0 line
g
# of blank lines between lower logo and last item line is 2 lines
[d=1]
0 line
h
# of blank lines between lower logo and last item line is 1 line
[d=1]
0 line
Bit c
There is no battery back-up on the TM-T88III. Therefore, when 'permitted' has been programmed and if
during printing a power failure occurs, the printing data
will be lost
. If 'prohibited' has been programmed,
the printing data will be sent from ECR to TM-T88III again.
SLIP PRINTER (6)
SF-87 1/0 bit
1
0
a
Kitchen printer ID # used as a slip printer
[SF-86.a,b=01] ---
Set [SF-107] also.
b
[00] KP 1; [01] KP 2; [10] KP 3; [11] KP 4
c
d
e
f
g
h
Bits a,b
The bill issue format on the KP is fixed as "format 1" [SF-83.a,b] (entire subtotal bill or check-out bill
always printed).
The kitchen printer function and the back-up kitchen printer are also available. The back-up bill format
will be completely the same as the normal bill format (no back-up message will be printed).
Available Slip Print Contents
TP-620
TP-822/832
CBM-1000
TM-T88III
Related Bits
Buffer print
o
o
o
Cheque print
o
-
-
[SF-64.c=1]
Date
o
o
o
[SF-7.g=1]
Time
o
o
o
[SF-83.c=1]
Slip upper logo
o
o
o
[SF-83.d=1]
Slip lower logo
-
o
o
[SF-86.d=1]
Slip validation
o
-
-
[SF-9]
Slip validation logo
o
-
-
[SF-82.a,b,c=1]
Slip validation time
o
-
-
[SF-9.a=1]
Upside-down character
-
o
-
