39
(SP-131) CHARACTER KEY LAYOUT FOR SETTING NAMES
There are programmable 94 characters in order to correspond to foreign language. The print font and
display font have to be created and downloaded to the ECR by yourself by using Font Maker 2 for
Windows.
Then programmable 94 characters (character codes: 129 ~ 222) and standard characters (01 ~ 97: see
table below) can be used in the character programming sequence after they are allocated to the
character key layout by this program SP-131.
To set character key layout
< SP >--{(131)--[X/ENTER] or select from the list}--{character code--[
•
] or select from the list}--
[PRESS REQUIRED KEY: press one of 47 programmable key positions for flat / 38 programmable key
positions for stroke (see below)]--[(A) for upper case letter, (B) for lower case letter (see below for the
position)]--[CL
]
To check character key layout
< SP >--{(131)--[X/ENTER] or select from the list}--[
•
]--(assigned key layout displayed)--
[(A) key to see keys for the upper case letter, (B) for lower case letter]--[press a key you wish to check the
character code]--[CL (you can enter the character code here)
]--[CL]
Refer to the next page for programming sample.
Character Code Table:
Refer to page 35.
Programmable Key Positions for Character Key Layout
Flat Keyboard
Stroke Keyboard
(A) (B)
047 043 039 035 031 027 023 019 015 011 007 003 001
CL
CL
038 033 028 023 018 013 008 004
046 042 038 034 030 026 022 018 014 010 006 002
7
8
9
7
8
9
037 032 027 022 017 012 007 003
045 041 037 033 029 025 021 017 013 009 005
4
5
6
4
5
6
036 031 026 021 016 011 006 002
044 040 036 032 028 024 020 016 012 008 004
1
2
3
1
2
3
035 030 025 020 015 010 005 001
(A) (B)
0
•
0
•
034 029 024 019 014 009
