Uniwell LX-5600 Programming Manual Download Page 117

Page: 117 / 130

113

TEST PROGRAMS

RAM TEST SP-9901

This test diagnoses the functioning capability of each RAM. The testing

process automatically

erases RAM contents (all programming and sales data)

and after the RAM test, the initial reset is

automatically done. After the RAM test is done, perform Auto Preset on

page 119

For all RAMs: RAMs on the MPU board and RAM board

< SP >--(9901)--[X2/ENTER]--[

•

/ENTER]--[CL] or {select from the list}--{select ALL RAMs from the list

or enter 0}--[

•

/ENTER]--[CL]

For selected RAM on RAM board:

Use this test when the RAM board is added. This is

not

available when more than 877 PLUs are already

programmed.

< SP >--(9901)--[X2/ENTER]--(RAM chip # on the RAM board: 1 ~ 4)--[

•

/ENTER]

or {select from the list}--{select RAM #01~04 from the list or enter RAM chip #: 1 ~ 4}--[

•

/ENTER]

9901 RAM TEST

00-ALL RAMs

01-#01 on RAM board
02-#02 on RAM board

03-#03 on RAM board

04-#04 on RAM board

Display Message of RAM Test

TEST RAM-##

Displayed during RAM test (RAM-## shows expanded RAM chip number).

RAM#01 200000

Standard RAM is OK. (No RAM board is installed.)

RAM#03 300000

RAM board SX MR K-UNIT 021-1M (2 x 4 M RAM chip: #1, 2) is OK.

RAM#05 400000

RAM board SX/TX MR K-UNIT 021-2M (4 x 4 M RAM chip: #1 ~ 4) is OK.

TEST RAM-## OK

The selected RAM chip is OK.

TEST RAM-## NG

The selected RAM chip is not installed.

RAM#nn XXXXXX

There is an error in the address shown.
RAM#nn : RAM chip number on RAM board   XXXXXX :  error address
RAM 1 : 200000 ~ 27FFFF      RAM 2 : 280000 ~ 2FFFFF
RAM 3 : 300000 ~ 37FFFF      RAM 4 : 380000 ~ 3FFFFF

* SYSTEM ERROR *

Shows the system error with buzzer sound.
Unplug AC cord. Contact your distributor.

Summary of Contents for LX-5600



































































































































Search results

Summary of Contents for LX-5600

Reviews:

Uniwell LX-5600, Programming Manual, Page: 117 / 130

Search results

Summary of Contents for LX-5600

Reviews: