Uniwell LX-5600 Programming Manual Download Page 68

Page: 68 / 130

PRINT/SYSTEM (8)

SF-8

1/0 bit

a With second drawer (see [MF-3.a] when [SF-64.a=1] or [CF-2.a] when

[SF-64.a=0] for drawer assignment)

with one drawer

b Only 1st price sales is printed on PLU report when sales at 2nd price is 0.

Sales of both 1st and 2nd
prices printed

c reserved

d reserved

Tip amount and tip media key name printed with key/symbol #76

When the tip media and tendering media are the same key, the tip and tendering
amounts are added together, then printed

not printed

g "*COPY*" message (key/symbol #65) is printed on 2nd buffer print

[SF-

1.d=1]

& 2nd check-out bill and onward

[SF-17.f=1]

not printed

Bit a

Bit g

Connect 2nd drawer connector to CN7 on the MPU board.

When ECR has been programmed to use a slip printer, post
receipt, issued by

BUFFER PRINT

key by depression of

SLIP OFF

key, never has the 2nd receipt message.

PRINT/SYSTEM (9)

SF-9

1/0 bit

a Time printed on (slip) validation

not printed

Dot Printer:

Item validation printed upside-down

normal character

Dot Printer:

Media validation printed upside-down

normal character

Dot Printer:

Total validation printed upside-down

normal character

e Item (slip) validation permitted one time only

unlimited

Media (slip) validation permitted one time only

unlimited

g Total (slip) validation permitted one time only

unlimited

h Total (slip) validation compulsory

not compulsory

PRINT/SYSTEM (10)

SF-10 1/0 bit

Dot Printer:

Warning message #24 displayed with continuous buzzer

sounding when journal paper ends during transaction (see also [SF-2.e])

not displayed

Dot Printer:

Warning message #23 displayed with continuous buzzer

sounding when receipt paper ends during transaction when factory optional
receipt paper near end sensor is used

not displayed

Dot Printer:

Warning message #6 or #7 displayed when validation paper

not inserted/removed (factory optional validation sensor required)

not displayed

Dot Printer:

Stamp logo (option: refer to

page 6

)

Thermal Printer:

Graphic logo (use PC programming module PLM 2000

to program graphic logo)

Literal logo

e Lower logo printed on receipt (also see [SF-6.e] for upper logo)

not printed

Thermal Printer:

Graphic logo printed in vertical double size

printed in normal size

[d=1]

Thermal Printer:

Graphic logo printed in horizontal double size (refer to

the next page)

printed in normal size

[d=1]

Bits a,c

When the printer stops or a validation paper is not removed,

RPF

JPF

key only can be pressed.

Press

key to start printing after the paper was replaced or the validation paper was removed.

CN7

MPU board

Summary of Contents for LX-5600



































































































































Search results

Summary of Contents for LX-5600

Reviews:

Related manuals for LX-5600

Brands by name

Popular brands

Uniwell LX-5600, Programming Manual

Search results

Summary of Contents for LX-5600

Reviews:

Related manuals for LX-5600

Brands by name

Popular brands