Uniwell LX-5600 Programming Manual Download Page 118

Page: 118 / 130

114

PHYSICAL RAM TEST

This test erases

all RAM contents on the MPU board and RAM board (same as SP-9901)

Perform the following operations:

Unplug the AC cord.

Turn the control key to SP position.

Press the following three keys at same time:

Flat Keyboard

Stroke Keyboard

While pressing these keys, plug the AC cord to turn the power ON.

After the automatic initial reset, RAM test is started automatically.
Refer to the previous page for the RAM test message.

Press CL key to finish the physical RAM test.
The "IR DONE" message will be displayed.

After the RAM test is done, perform (3) Auto Preset on

page 119

ROM TEST SP-9902

Model name - type - ROM version, check-sum and on-bit will be displayed and printed on the receipt
and journal. This test

does not erase

the RAM contents. (It takes about one minute to check.)

< SP >--{(9902)--[X2/ENTER] or select from the list}--[

•

/ENTER]

PLU DATA ERASE SP-289

This operation

erases all PLU programming data

. Other programs will not be erased.

This is not on the program list.

< SP >--(289)--[X2/ENTER]--(1919)--[X2/ENTER]

TEST PRINT SP-9909

< SP >--{(9909)--[X2/ENTER]--or select from the list}--[

•

/ENTER]

Summary of Contents for LX-5600



































































































































Search results

Summary of Contents for LX-5600

Reviews:

Uniwell LX-5600, Programming Manual, Page: 118 / 130

Search results

Summary of Contents for LX-5600

Reviews: