UNIVERSAL TECH MyXerver MX3600, User Manual

Page: 29 / 66

29
Identification
Name You can change the name of the NAS here.
Comment Enter a comment (e.g. the location of the NAS).
Workgroup Name This should match the "Workgroup Name" on your PCs. If the Workgroup name
does not match, access to the NAS is still possible, but the NAS will not appear
when you click the "Browse Network" button (for example, when adding a
Network Printer)
Printer Name Specify one name for the Printer Server. After you plug one printer into one USB
port, the Printer Name will occur in Network Neighborhood and you can click it to
install the Printer Server
Note: Some special characters (e.g. " / \ [ ] : ; | = . , + * ? < > ' ` ( ) # $ %) and 2-byte characters cannot be used in
these fields.
Date & Time
Time Zone Select the correct time zone for your location.
Change System
Date and Time as
Following Check this box to update date and time. The date and time setting will not be
sent to the server if this box is not checked.
Date Enter the local date. The NAS Server will set it own calendar according to the date
you provide.
Time Enter the local time at your location. The NAS Server will set its own clock
according to the time you provide. Remember that this is not sent to the Server
until you click "OK".