17
CHAPTER 4 CLIENT PC SETUP
A.
FINDING MYXERVER™ MX3600 ON YOUR NETWORK
FOR WINDOWS VISTA™/XP/2000 OR NT 4.0 USERS
1. Open Network Neighborhood or My Network Places.
2. Locate the MX3600. If it is not listed, double-click Entire Network. Then double-click the Workgroup
that the MX3600 is in. By default, the MX3600 is in Workgroup.
3. Double click on the MX3600 icon. You will then see a list of shares (shared folders). You can read and
write files to these shares, unless the MX3600 administrator has blocked access.
FOR WINDOWS 95/98/ME USERS
If you use Windows 95/98/ME, you must logon to the Network correctly in order to use the NAS.
To check your Network Logon, following this procedure:
1. Click on
Start - Settings - Control Panel - Network
.
Ensure the
Primary Network Logon
is set to "Client for Microsoft Networks", as shown below.
2. Windows will prompt you to logon to the Network when it starts (boots).
3. You MUST logon. (Otherwise, if you press ESC or click Cancel, no network resources will be available.)
4. When you logon, you need to use a valid User Name and Password which has been defined by the
NAS administrator.
Summary of Contents for MyXerver MX3600
Page 28: ...28 E SYSTEM SCREEN...
