Safety Instructions
37
Warning Symbol
The exclamatory point within an
equilateral triangle is intended to alert
the user to the presence of important
operation and maintenance (servicing)
instructions in the manual accompany-
ing the unit.
Danger Symbol
The lightning flash with arrowhead
symbol within an equilateral triangle
is intended to alert the user to the
presence of dangerous voltage in the
unit
Warning
Maintenance Notice
Caution
z
Do not put the unit: near strong magnetic field,
somewhere exposed to direct sun or near heat
radiation equipment (such as a heater), at top of
other heat radiation objects, in a place with bad
ventilation and much dirt, somewhere subject to
vibration and instability, somewhere exposed to
moisture or rain. The unit shall be installed in a
smooth and dry place with good ventilation.
z
When the unit is moved from a cold place to a
warm one, the laser head might get dewed and
the unit might not work normally. In this case, keep
the power on for an hour or two (with no disk
loaded) before playing normally.
z
Clean the surface of the unit with some neutral
detergent. Do not use organic impregnant such
as alcohol and gasoline. Never polish the unit with
sand paper.
z
If the unit has not been used for a long time,
disconnect the power plug from the wall outlet.
Note: Do not pull by the power cord.
z
Do not place heavy objects on the unit to avoid
the influence on normal playing.
To prevent fire or electric shock, do not expose the
unit to rain or moisture. Never attempt to open the
cabinet, dangerous high voltages are presented in
the unit. Refer servicing to qualified service personnel
when necessary.
z
The unit employs a laser system. To prevent direct
exposure to the laser radiation, do not attempt to
open the cabinet. Visible laser may radiate when
the cabinet is opened or the interlocks are
defeated. Do not stare into the laser beams.
z
To ensure the proper use of the unit, read this
manual carefully.
z
Keep this manual properly for future reference. If
the unit requires servicing, contact the seller or
our service center
