![background image](http://html2.mh-extra.com/html/madgetech/rtdtemp2000/rtdtemp2000_quick-reference-card_3336270001.webp)
MadgeTech, Inc.
PO Box 50
l
Warner, NH 03278
Phone 603.456.2011
l
Fax 603.456.2012
www.madgetech.com
l
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
REV F 2010.04.12
To view the full MadgeTech product line,
visit our website at
www.madgetech.com.
Red 485
Dark Blue Pantone 289
Light Blue 58% of Pantone 289
Product Information Card
RTDTemp2000
Product Quick Reference Card
RTDTemp2000
Precision RTD Based Temperature Recorder with LCD Display
Part Number
RTDTemp2000
Temperature Sensor
100Ω Platinum RTD
Temperature Range
-200 to +850°C
Temperature Resolution
0.01°C
Calibrated Accuracy
+0.05°C (-200 to +260°C)
+0.3°C (+260 to +850°C)
Memory
174,762
Sample Rate
2 seconds up to 24 hours
Required Interface Package
IFC110 or IFC200
Typical Battery Life
1 year @ 1 minute reading rate with display off, 30 days
typical with continuous LCD display use
Optional AC adapter available
Baud Rate
115,200
Operating Environment
-20 to +60°C 0 to 95%RH (Non-Condensing)
Materials
Black anodized aluminum
Dimensions
4.8” x 3.3” x 1.25” (122mm x 84mm x 32mm)
Approvals
-
Specifications subject to change.
See MadgeTech’s terms and conditions at www.madgetech.com
Device Maintenance
Battery Replacement
Materials:
3/32” HEX Driver (Allen Key)
Replacement Battery (U9VL-J)
- Remove the cover from the device by unscrewing the four
screws.
- Remove the battery from its compartment and unsnap it
from the connector.
- Snap the new battery into the terminals and verify it is secure.
- Replace the cover taking care not to pinch the wires. Screw
the enclosure back together securely.
Note: Be sure not to over tighten the screws or strip the threads.
Battery Warning
WARNING: FIRE, EXPLOSION, AND SEVERE BURN HAZARD. DO NOT
SHORT CIRCUIT, CHARGE, FORCE OVER DISCHARGE, DISASSEMBLE,
CRUSH, PENETRATE OR INCINERATE. BATTERY MAY LEAK OR
EXPLODE IF HEATED ABOVE 60°C (140°F).
Recalibration
The RTDTemp2000 standard calibration is two points, 50
Ω
and
150
Ω
.
Pricing:
Recalibration traceable to NIST
$60.00
Recalibration
$40.00
Additional:
As Found Data
$15.00 per parameter/channel
Verification Point
$15.00 per point
To send the devices back, visit www.madgetech.com, select
Services
then
RMA Process
.