background image

COMPONENT MAINTENANCE MANUAL

AVIATION RECORDERS

Model FA5000

23

70

40

Rev. 06

March 16/16

RECORDER PART NUMBERS:

5001

6103

(  ) CVDR

5011

6103

(  ) CVDR

5001

6133

(  ) CVDR with Video

5003

6103

(  ) CVDR

500

4030

000 RIPS

COMPONENT  MAINTENANCE  MANUAL WITH 

ILLUSTRATED PARTS LIST 

P/N: 165E5398

00

IN ACCORDANCE WITH

FAA TSO

C123b,

C124b,

C155a,

C177 

EUROCAE ED

112

VENDOR CODE: 06141

MODEL FA5000

COCKPIT VOICE and DATA RECORDER

DISTRIBUTION STATEMENT:  

This document contains L­3 Aviation Recorders privileged

information and must not, without prior written consent of L­3 Aviation Recorders, be used or reproduced
in whole or in part, or communicated to any person except as authorized by L­3 Aviation Recorders.

WARNING:

  This technical data is controlled under the Export Administration Regulations (EAR) ECCN

7E994, and may not be exported to a foreign person, either in the U.S. or abroad, without a license or
exception from the U.S. Department of Commerce.

The document reference is online, please check the correspondence between the online documentation and the printed version.

Summary of Contents for FA5000











































































































































































































Reviews: