64
System Setup
To satisfy customers with different characteristics and
suit related devices of different qualities, the unit
provides various functions. You can setup the system
of the unit and regulate its operations to meet your
taste and suit well with other related devices of yours.
But if you think it’s too complex, you may also use
the default settings, which can meet your basic
demand.
Operation Interface and General Steps
This section will introduce the menu interface of the
System Setup and general operation steps.
1. Press the [
SETUP
] button to enter the System
Setup mode. Now the system setup control bar
menu will appear on the top of the OSD, as shown
in the following chart.
The meanings of the icons are as follows.
1) GENERAL Settings
2) PLAYBACK Settings
3) RECORD Settings
4) LANGUAGE Settings
5) CHANNEL SCAN
6) CLOCK Settings
Screen Saver Settings
The Screen Saver function means that when the unit
is idle (or without monitored output) for some time,
some interesting picture screen saver pictures will
appear automatically.
1. In the General Settings menu, use the
T
or
S
button to move the cursor and select the
«Screen Saver» item.
2. Press the [
SELECT
] button and the «Screen
Saver» item will drop down a list as shown in
the chart.
3. Use the
T
or
S
button to move the cursor, and
select «ON» or «OFF».
4. Press the [
SELECT
] button to enable or disable
the Screen Saver function.
z
When the screen saver appears, press any
button to exit it.
5. Press the [
RETURN
] button to return to the upper
level menu and set up other items.
Progressive/Interlace
1. In the General Settings menu, use the
T
or
S
button to move the cursor, select the «Progressive/
Interlace» item and press the [
SELECT
] button.
2. Select the Progressive or Interlace option for
video scan output mode, and press the
[
SELECT
] button to confirm.
Video Out
1. In the General Settings menu, use the
T
or
S
button to move the cursor, select the «Video Out»
item and press the [
SELECT
] button.
2. Select YUV, RGB or CVBS terminal according to
your need and press the [
SELECT
] button to
confirm.
Video Output Format
1. In the General Settings menu, select the «Video
Output Format» item and press the [
SELECT
]
button to drop down a menu.
2. Select PAL or NTSC.
3. Press the [
SELECT
] button to confirm.
This setting must be in accordance with the TV
system, Otherwise the video output might not work
properly.
Restore Factory Settings
1. In the General Settings menu, use the
T
or
S
button to select the «Restore Factory Settings»
item and press the [
SELECT
} button. The OSD
will display as follows.
2. Use the
W
or
X
button to select «OK».
3. Press the [
SELECT
] button to restore all default
settings. When your unit doesn’t work properly, it
may probably result from some wrong settings.
2. Use the
T
or
S
button to select items to be setup
in the control bar and press the [
SELECT
] button
to enter the setup menu of the item. In the setup
menu of a certain item, press the arrow buttons
and the [
SELECT
] button to operate some control
units, and the corresponding setting will be done.
3. Press the [
RETURN
] button to return to the upper
level menu. Press the [
SETUP
] button to exit the
System Setup mode.
z
The above steps are general and typical operations.
Some settings might not need a certain step, or require
more steps.
z
Please set up the system in the Eject Disc mode
or No Disc mode, or some settings cannot be done.
General Settings
1. Enter the System Setup mode.
2. In the System Setup control bar menu, use the
T
or
S
button to select the «General» item.
3. Press the [
SELECT
] button to enter the General
Settings menu, as shown in the chart.
Screen Saver On
Progressive/Interlace Interlace
Video Out YUV
Video Output Format PAL
Restore Factory Settings OK
System Setup (General)
Note:
